The Best Seller Machine Product provide Cool Cheap Power Amplifiers Double Channel Pressure Flow Control Valves 0 10 V Molding Injection Machine Injection Power Machine Plastic. Now USD ~ USD /piece. Dont waste your time. Buy Now only in Fullmida Automation Equipments Store Trusted Seller Store!
The flow pressure control valve for power amplifier
Model PF-DC-10
The main technical parameters:
Power supply: DC DC (24-36V) / (24V-48V)
The maximum output power: 24/48W
Maximum output current: 1050MA
Response speed: 0.2-5s
Load impedance: 10/40 ohm(load of 40 ohm)
The input voltage is only 48V, but also can only be received in the
F (DC+) and GND)
Control signal input: 0~10VDC
FUSE:3A/250V
Flutter frequency: 0-500HZ
Ambient temperature: 0~65 degrees
Temperature drift (maximum): 0.3mA/C
The application of control type
All the electrical position feedback control of direct drive type
and pilot type overflow valve, proportional pressure and flow.
A ramp generator, respectively, the rise and fall time can be
adjusted independently of the current limit /
The lower limit of wrong power pole protection function. The
product adopts SMD SMT manufacturing process, small volume
resistance
Anti-jamming, high quality and inexpensive.
Terminal English description
P (DC+) - pressure input power DC24V
F (DC+) - DC24V or DC48V input power flow
P= GND - input power common pressure
F= flow - pressure valve is P+
DC= DC P- - negative pressure valve
F+ - positive flow valve
F- - negative flow valve
12V - variable resistor with auxiliary power supply
GND - public control point
P (VIN) - point pressure input signal
F (VIN) - flow input signal
The definition of P potentiometer circuit board (MAX) - maximum
pressure adjustment
P (MIN) - minimum pressure adjustment (the factory has a good tune,
no need to adjust)
P (UP) - pressure ramp up time (factory adjusted minimum)
P (DOWN) - pressure ramp down time (factory adjusted minimum)
F (UP) - flow ramp up time (factory adjusted minimum)
F (DOWN) - flow ramp down time (factory adjusted minimum)
F (MAX) - maximum flow adjustment
F (MIN) - minimum flow adjustment (the factory has a good tune, no
need to adjust)
****************************************************************
Customer Satisfaction
Please don\'t hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Payment
1. Full payment must be paid within 7 days after placing your order.
2. We will make delivery of the goods within 3 working days after receiving your payment.
Shipping and handing
1. DHL is our preferred shipping method. Meanwhile TNT,EMS,Fedex,UPS are available.
2. Make sure to leave telephone number when filling your buyer information.
3.You can check the goods where it is in transit through tracking NO. .
Refund(Exchange Only)
1.If you are not satisfied with your purchase, you can exchange the items received. you must contact us within 5 days of the receipt of your order. And you should pay all additional shipping fees incurred and the items returned should be kept in their original status.
2.If you wish to exchange defective or incorrect shipped goods, please contact us within 5 days after receiving the goods.
Notes
1. The buyer are responsible for any insurance you think necessary.
2. The processing time for a specific order varies with the product type and stock status. Mostly, processing time can be 3 to 15 working days.
Feedback
1.Since your feedback is very important to our business\'s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It\'ll just take you 1 minute.
2.Please contact us before leaving any negative or neutral feedback. We will work with you to solve any problems.Thank you!
Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Super Deals Power Amplifiers Double Channel Pressure Flow Control Valves 0 10 V Molding Injection Machine Injection Power Machine Plastic
No comments:
Post a Comment